Franke Sissons Wash Basin Square Rimmed Edge 400x400x300 - C20133N
A range of small inset sink bowls manufactured from 0.9mm thick grade 1.4301 (304) stainless steel, satin polish finish. All have rimmed edges, suitable for insetting into a worktop. Models C20120N and C20137N have a 17 mm rimmed edge wereas all the other sink bowls incorporate a 20 mm rimmed edge. Each bowl is prepared for a 38mm waste and overflow. Waste, plug, chain and overflow are availables extras. No tapholes are provided therefore any taps to be fitted must be mounted either through the worktop or on the wall. Fixing clips are supplied with each bowl.
NOTE: It may be necessary to notch the worktop when fitting an overflow
Dimension 440 x 300 x 440 mm (W x H x D)
Overall depth - 440.00 mm
Overall height - 300.00 mm
Overall width - 440.00 mm
Type of mounting - Inset mounting
Bowl height - 300.00 mm
Bowl depth - 400.00 mm
Bowl width - 400.00 mm
Overflow - Yes
Number of tap holes - 0.00000
Tap ledge - No
Waste size - DN 40
Bowl finish - Satin finish
