Mechline Aquajet Wash Down Hose Reel with Standard Rose Head Gun (includes a wall mounted PIVOT bracket) - MERK15/SSG
FEATURES & BENEFITS
• Spring loaded latch mechanisms allow complete positive hose
retractions every time.
• Ground edge drive springs minimise fractures found in conventional
slit edge springs.
• Full flow shaft and swivel ensure no water pressure drop or restriction
of flow.
• De-clutching arbour eliminates the possibility of spring damage due to
reverse winding of the reel spool.
• Hose changes are made easier on open reels as the reel does not
need to be pre-tensioned.
• A variety of mounting options available.
• Material: UPVC (Polypropylene).
• NB: Installation must comply with local water authority codes.
Isolation controls and check valves not included.
• NB: Minimum 3-bar pressure is recommended to provide reasonable
washing performance
TECHNICAL INFO
• Water Pressure: 3 - 17 bar (250psi).
• Hose length: 15m (50ft).
• Hose dia: 12mm (1/2-inch).
• Inlet: 1/2-inch BSP, female connection.
• Flow rate per minute - 8.15 LPM at 3 bar