Mechline AquaJet Pre-Rinse Spray. AJPR30 base / SUPER SHORT style/ No bowl filler / STANDARD gun - AJPR30-SS-BF0-S
Mechline has launched a range of 'short' AquaJet Pre-Rinses designed to fit areas where the traditional height of a pre-rinse makes it difficult to install and use.
Model range: AquaJet 30
Base: AJPR30
Style: Super Short
Bowl filler: No bowl filler (BF0)
Spray gun: Standard
Pedestal: Twin
Mount: Deck mounted
Water feed: Twin
Controls: Lever
Connect: 2x (M) 1/2-inch
Accredita: WRAS
FEATURES & BENEFITS
• A variety of choices to suit each application.
• WRAS approved across the range.
• Pre-assembled, ready to install - saves time on site.
• All assembled models are factory tested up to 6 bar for quality
assurance.
• Choice of optional bowl fillers, water dispensing guns and accessories.
• Restraining device available to prevent hose from overstretching into
basin, which reduces abuse and helps meet Water Board regulations.
• Super strong, food-grade, high-flow water hose.
TECHNICAL INFO
• Connections: 2x (M) 1/2-inch
• Tap hole req: 2x 25mm
• Flow rates: 7.99 lpm tested at 3 bar pressure
Water
connection: This pre-rinse spray
is designed for connection to a hot water supply up to 50 C and a cold
water
supply. Water pressure must be between, 1.5
bar to 5 bar
Water
pressure lower than 1.5 bar will
affect the performance of the pre-rinse. Do not connect the pre-rinse
to a
water supply with pressure higher than 5 bar. Water supply must be
flushed free
of all debris prior to connection to the pre-rinse.
See the full range below