Franke Sissons Wash Basin with Rimmed Edge 380x300x180 - C20120N
A range of small inset sink bowls manufactured from 0.9 mm thick grade 1.4301 (304) stainless steel, satin polish finish. All have rimmed edges, suitable for insetting into a worktop. Models C20120N and C20137N have a 17 mm rimmed edge whereas all the other sink bowls incorporate a 20mm rimmed edge. Each bowl is prepared for a 38mm waste and overflow. Waste, plug, chain and overflow are availables extras. No tapholes are provided therefore any taps to be fitted must be mounted either through the worktop or on the wall. Fixing clips are supplied with each bowl.
NOTE: It may be necessary to notch the worktop when fitting an overflow.
Overall depth - 340.00 mm
Overall height - 180.00 mm
Overall width - 414.00 mm
Type of mounting - Inset mounting
Bowl height - 180.00 mm
Bowl depth - 380.00 mm
Bowl width - 300.00 mm
Overflow - Yes
Number of tap holes - 0.00000
Tap ledge - No
Waste size - DN 40