Franke Sisson Wash Basin 460x340x180 - C20174N
Basin to be installed from above, centre waste
Small rimmed edged bowl for insetting into worktops. Manufactured from 0.9 mm thick grade 1.4301 (304) stainless steel with a satin polish finish. The bowl has a 20 mm rimmed edge and is prepared for a 38 mm waste and overflow. There are no tap holes therefore taps are to be mounted through the worktop or on the wall. Fixing clips are supplied with each bowl. Waste, plug, chain and overflow are available extras. NOTE: It may be necessary to notch the worktop when fitting an overflow.
20 mm rimmed edge
Centre waste
Dimensions 460 x 340 x 180 mm (W x H x D)
Cut-out size 470 x 350 mm
Overall depth - 380.00 mm
Overall height - 180.00 mm
Overall width - 500.00 mm
Type of mounting - Inset mounting
Bowl height - 180.00 mm
Bowl depth - 460.00 mm
Bowl width - 340.00 mm
Overflow - Yes
Number of tap holes - 0.00000
Tap ledge - No
Waste size - DN 40
Bowl finish - Satin finish
