JavaScript seems to be disabled in your browser.

You must have JavaScript enabled in your browser to utilize the functionality of this website. Click here for instructions on enabling javascript in your browser.

Metcalfe 14lb Sink Hight Potato Peeler

Standard and Sink Height models available

• Powerful direct gear drive motors. The 14lb (6.3kg) peelers have 0.5hp geared units

• Standard height or sink height models available

• Designed to enable the user to operate, clean and maintain with the minimum of effort

• Designers and patent holders of the guarded discharge chute. Fully compliant with the requirements of the Health and Safety at Work Act, 1974. It protects the operator by allowing the door to the chamber to be opened which stops hand access through the door aperture whilst the machine is working

• Motor and gearbox units are housed inside the pedestal therefore no external projections

• The drive between the output shaft of the unit and the drive shaft of the peeler is by means of a flexible coupling which will prevent damage to the motor or gearbox if the machine is accidentally jammed or overloaded

• Top casting removable without tools so that the rotor plate can be lifted out. Turn on water and the whole machine is flushed clean . Cleaning should be carried out on a daily basis

• Rotor plate bonded with abrasive grit. Inside wall of peeling chamber has patented cast-in abrasive serrations which dispenses with the need for abrasive coating. Consequently there is less potato loss during both peeling and boiling and the efficiency of the serrations will last the life of the machine

• All peelers supplied with a wall mounted starter which incorporate the on switch, emergency stop, no-volt release and overload protection features - fitted with 13amp plug

• All Metcalfe pedestal peelers are available with either single phase or three phase motors

• Machines fitted with a water inlet and hose connection incorporating an air break. Stop tap can be fitted if required. Provision for fitting water inlet on either side of machine

• Waste outlet screwed 2" BSP female

• Waste disposal adaptor dispenses with need for an interceptor. Gives an adequate water supply to the peeling chamber and additional water supply to the waste outlet. A sweep tee is fitted to the outlet and the additional supply is directed into it to flush away the sludge. Unit supplied complete so only one water supply needed to be connected. Water Byelaws Scheme approved product when connected to water header tank (optional extra)

• External interceptor with tank and basket can be supplied as an alternative

• Metcalfe offer a comprehensive 1 year warranty and a responsive after sales service

model finish capacity
usage weight
14lb standard height Hammer grey painted 6.3 heavy duty 60 1.3
14lb sink height Hammer grey painted 6.3 heavy duty 64 1.3
28lb standard height Hammer grey painted 12.6 heavy duty 67 1.5
28lb sink height Hammer grey painted 12.6 heavy duty 71 1.5

Guarded discharge chute - for ‘14’
Guarded discharge chute - for ‘28’
Large external interceptor
Waste disposal adaptor
3ft. length water inlet hose and tap connector
Metcalfe Filtershield
Innovative food filtration system designed to protect the drainage systems in commercial kitchens from food related blockages. For use with the Metcalfe range of potato peelers
Type 'A' tundish

****Price includes Delivery and 1 Years Parts and Labour Warranty(UK only)****

Delivery Information
Free delivery on all order over £150.00 (excl.VAT) to any UK mainland address.

Only £9.95 delivery for orders Under £150.00 (excl.VAT) to any UK mainland address.
For offshore or export orders call or email for delivery cost.