MECHLINE AquaJet 30 Short Deck mounted Pre-Rinse Sprays Hight 830mm Two water feed, dual pedestal, deck-mounted + 12" Faucet
Mechline has launched a range of 'short' AquaJet Pre-Rinses designed to fit areas where the traditional height of a pre-rinse makes it difficult to install and use.
Only deck-mounted models modified. - overall height 830mm
Aquajet is a fully assembled pre-rinse spray which has been factory
pressure and flow tested to guarantee performance and minimise
Two water feed, dual pedestal, deck-mounted.
WRAS approved. + 12" Faucet
Variety of choices to suit each application.
Super strong, food-grade, high-flow water hose.
Pre-assembled, ready-to-install – saves time on site.
Assembled models – Factory tested for Quality Assurance to 6 bar.
Complete spares available, fitting most brands of pre-rinses on
Restraining device available (AJ PR RS) to prevent hose from
overstretching into basin – helps meet Water Board regs & reduce
Guaranteed against manufacturing defects.
Extra long 300mm wall bracket can be shortened to a perfect fit
avoiding the typical on-site problems of extending a short bracket.
connection: This pre-rinse spray
is designed for connection to a hot water supply up to 50 C and a cold
supply. Water pressure must be between, 1.5
bar to 5 bar
****12 month parts only warranty(UK only)****
pressure lower than 1.5 bar will
affect the performance of the pre-rinse. Do not connect the pre-rinse
water supply with pressure higher than 5 bar. Water supply must be
of all debris prior to connection to the pre-rinse.
See the full range below