Franke Sissons Wash Basin Wide Rimmed Edge - C20136R
Large sink bowls are supplied for insetting into worktops and have a
rimmed edge. All the sink bowls are manufactured from 1.2mm thick
austenitic grade stainless steel with satin polish finish. An earthing
lug is fitted to the underside of the bowl. All bowls are supplied with
an 38mm waste outlet and standpipe strainer overflows. Sink bowls for
insetting into worktops are supplied with fixing studs and brackets.
Full fitting instructions are supplied. L or R after the code number
refers to the handing of the waste outlet ie. back left or back right
hand corner. Cut Out Sizes: These cut out sizes are for inset bowls
only.
Overall inset sink bowl - rimmed edge
Right hand waste
Dimensions 635 x 300 x 485 mm (W x H x D)
Bowl Dimensions 600 x 300 x 450 mm (W x H x D)
Overall depth - 485.00 mm
Overall height - 300.00 mm
Overall width - 635.00 mm
Type of mounting - Inset mounting
Bowl height - 300.00 mm
Bowl depth - 450.00 mm
Bowl width - 600.00 mm
Overflow - Yes
Number of tap holes - 0.00000
Tap ledge - No
Waste size - DN 40
Bowl finish - Satin finish